Информация о публикации

Просмотр записей
Инд. авторы: Sigova E.M., Doronin S.V.
Заглавие: Evaluation of the bearing capacity of the cover-wall connection of a vertical tank under above-design stresses
Библ. ссылка: Sigova E.M., Doronin S.V. Evaluation of the bearing capacity of the cover-wall connection of a vertical tank under above-design stresses // Chemical and Petroleum Engineering. - 2015. - Vol.50. - Iss. 11-12. - P.770-773. - ISSN 0009-2355. - EISSN 1573-8329.
Внешние системы: DOI: 10.1007/s10556-015-9976-4; РИНЦ: 26877575;
Реферат: eng: This paper is dedicated to investigation of characteristics of the elastoplastic deformation of the coupling between a self-bearing conical cover and wall of a low-pressure vertical tank. The limiting loads corresponding to the appearance of the first plastic deformations and loss of bearing capacity are determined with consideration of hardening of the structural material.
Ключевые слова: tank; Limiting loads; hardening; bearing capacity;
Издано: 2015
Физ. характеристика: с.770-773
Цитирование: 
1. SP 20.1330.2011, Loads and Effects. Updated Edition of Construction Rules and Regulations SNiP 2.01.07–85, Moscow (2011).
2. V. N. Gordeev, A. I. Lantukh-Lyashchenko, V. A. Pashinskii, et al., Loads and Effects on Buildings and Structures, A. V. Perelmuter (ed.), Izd. ASV, Moscow (2007).
3. N. A. Makhutov, Strength and Safety: Fundamental and Applied Research, Nauka, Novosibirsk (2008).
4. A. A. Gvozdev, Limiting-Equilibrium Analysis of the Bearing Capacity of Structures, Stroiizdat, Moscow (1949).
5. A. R. Rzhanitsyn, Structure Analysis with Consideration of Plastic Properties of the Material, Stroiizdat, Moscow (1954).
6. Ya. A. Kamenyarzh, Limiting Analysis of Plastic Bodies and Structures, Nauka, Moscow (1997).
7. B. G. Nile, Analysis of Structures with Consideration of Plastic Properties of Their Materials [Russian translation], Gosstroiizdat, Moscow (1961).
8. F. G. Hodge, Analysis of Structures with Consideration of Plastic Deformation [Russian translation], Mashgiz, Moscow (1963).
9. L. M. Belen'kii, Analysis of Marine Structures in the Plastic Stage, Sudostroenie, Leningrad (1983).
10. E. M. Apollonov and O. M. Tarovik, Limiting Loads and Elastoplastic Deformation of Marine Beam Designs, TsNII im. Krylova, St. Petersburg (2012).
11. V. S. Gudramovich, V. P. Gerasimov, and A. F. Demenkov, Limiting Analysis of Structural Components, Naukova Dumka, Kiev (1990).
12. G. V. Klevtsov, Plastic Zones and Fracture Diagnostics of Metallic Materials, MISiS, Moscow (1999).
13. S. V. Doronin and E. M. Sigova, “Problems of computational analysis of shell components in production equipment,” Khim. Neftegaz. Mashinostr., No. 3, 3–6 (2007).
14. E. M. Sigova and S. V. Doronin, “Computational assessment of shell components of production equipment,” Khim. Neftegaz. Mashinostr., No. 11, 7–10 (2007).